Stainless steel
Stainless Steel Plate & Sheet
Cold rolled sheet, hot rolled sheet and medium plate in 304 / 316L / 430 / 2205 / 201 — thickness 0.3–80 mm, width up to 2000 mm.
0.3–80 mmThickness
≤ 2000 mmWidth
304 Cold Rolled Stainless Sheet
Codess-pl-cr-304
Read more
316L Cold Rolled Stainless Sheet
Codess-pl-cr-316l
Read more
201 Cold Rolled Stainless Sheet
Codess-pl-cr-201
Read more
304 Hot Rolled Stainless Plate
Codess-pl-hr-304
Read more
304 Stainless Medium Plate
Codess-pl-med-304
Read more
316L Stainless Medium Plate
Codess-pl-med-316l
Read more
2205 Duplex Stainless Plate
Codess-pl-med-2205
Read more
Brushed Stainless Sheet (HL / No.4)
Codess-pl-sf-hl
Read more
8K Mirror Stainless Sheet
Codess-pl-sf-8k
Read more
Embossed Stainless Sheet
Codess-pl-sf-emb
Read more
Available specification
| Grades | Thickness | Width / diameter | Standard |
|---|---|---|---|
| 304 · 304L · 316L · 430 · 2205 · 201 | 0.3–80 mm | ≤ 2000 mm | ASTM A240 / EN 10088-2 |
Ranges shown are standard availability; non-standard sizes can be made to order. Thickness is nominal — tolerance judged to ASTM A480 / EN 10088-2.
Typical applications
- Chemical tanks, pressure vessels and reactor shells
- Architectural cladding, roofing and balustrades
- Food processing and pharmaceutical equipment
Delivery and inspection
- EN 10204 3.1 mill test certificate with heat number on every shipment
- Cut to size with trimmed edges; PVC film on one or both faces on request
- Thickness tolerance judged to ASTM A480 / EN 10088-2, tighter classes available
Need a quote or technical support?
Send the grade, size, quantity and destination port — we reply with FOB / CIF within 24 hours.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Sheet metal enclosures — control cabinets, distribution boxes, instrument housings
- Appliance panels — fridge sides, air conditioner shells, hood panels
- Architecture — elevator interiors, ceilings, decorative trims
- Medical and laboratory — worktops, instrument carts, cleanroom doors
- Laser cutting — flat parts cut straight from sheet
Selection FAQ
- How flat is the sheet?
- Supplied to ASTM A480 / EN 10088-2 flatness; after decoiling the bow is within the standard tolerance. Tighter classes can be specified.
- Can it be supplied with protective film?
- Yes — PVC or laser film, one or both faces, black-and-white or transparent.
Not sure which grade fits? Use the grade selector