Waterjet Cut Parts
Waterjet cut parts
Waterjet cut stainless parts · no heat-affected zone · 1–100 mm
1specsSpecs in stock
1gradesGrades available
1–100 mmThickness range
Specification and notes
- Grade: 304 · 304L · 316L · 321 · 201 · 430 · 409 · 2205 (on request)
- Finish: 2B · BA · No.1 · No.4 · HL · 8K · embossed (on request)
- Standard: ASTM A240 · EN 10088-2 · JIS G4304/4305 · GB/T 3280
- Packing: wooden / steel pallet, edge protector, PVC film (on request)
Ranges are typical; the contract and technical agreement govern.
Need a quote for waterjet cut parts?
Send grade, thickness, width, quantity and destination port — FOB / CIF quote within 24 hours.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Thick shaped parts — flanges and connection plates from 20–80 mm
- Heat-sensitive parts — precision parts that must not distort
- Laminates and stacks — stainless cut together with other materials
- Food and medical equipment — cut faces with no heat-affected zone
Selection FAQ
- Waterjet or laser?
- Laser for sheet up to about 12 mm and tight tolerance — faster, narrower kerf. Waterjet for thick plate, heat-sensitive parts, and where a heat-affected zone is unacceptable.
- How rough is the waterjet cut face?
- Typically a matte finish around Ra 3.2–6.3. Slower cutting gives a smoother face at higher cost.
Not sure which grade fits? Use the grade selector