C18 · Apparel & Garment
Stainless Steel Plates for Textile and Apparel Industry: 304/201 Selection and 3 Part Lists
In the Textile and Apparel Industry, we have organized three parts using stainless steel: commonly used 304 / 201 with thickness ranging from 0.3–3 mm.
Three parts and material list
| Part / Component | Recommended grade | Size / Thickness | Surface | Main failure modes | Reference standards |
|---|---|---|---|---|---|
| Chain head/chain tooth | 304/201 | 0.3–1.5mm | Polishing/Glazing/Dielectric treatment | Repeated pulling and wearing + sweat Cl⁻ corrosion | QB/T 2171 |
| Buttons/Nails/Snap eyes | 304/201 | 0.3–1.0mm | Mirror finish/Finished texture | Sweat+detergent+friction | QB/T standard series |
| Pouch buckles/Packaging hardware | 304/201 | 0.8–3.0mm | Polished/Rubbed/Gilded | Load-bearing+sweat+tannin from leather | QB/T 1333 etc. |
Table isStandard configuration. The same part may switch from 304 to 316L or 2205 based on usage conditions—explain the conditions, it's easier than specifying grades.
Select Materials
- Top Grades in This Industry: 304 (3), 201 (3)
- Thickness Range: 0.3–3 mm
Common Issues
What type of stainless steel is used most by the textile and clothing industry?
Top Parts with Highest Occurrence: 304 (3 items), 201 (3 items). Specific parts may vary based on media and temperature, such as stainless countertops that require different grades depending on saltwater exposure.
Most Common Issues
Which part of the component is most prone to failure?
Typical issue: "Zipper head/teeth" - repeated opening/closing wear + sweat chloride corrosion. Recommended grade 304/201, thickness range 0.3–1.5 mm. For this condition, specify media concentration, temperature, and cleaning method in the design phase.
What thickness should I choose?
Thickness ranges from 0.3–3 mm. Thin plates consider forming and surface quality; thick plates for welding strength. Different manufacturers may have different values based on your drawings or operating conditions. Recheck as needed.
Applications3
Thickness0.3–3mm